Wennstrom introduces PetroPoint from Hectronic.

As official distributor of Hectronic products, Wennstrom has introduced the wireless, automatic vehicle recognition system PetroPoint on the Swedish market. PetroPoint is easy to install and integrates seamlessly into auto fuel terminals such as HecFleet and TA2331 (and others). PetroPoint is available in two versions: Retail and Fleet+ - more information can be found by following the link below.

PetroPoint (in Swedish only)

Welcome to our stand D05:80 at Lastbil 2008 in Jönköping, Sweden.

Visit www1.elmia.se/lastbil

P/V with integrated flame arrester.

Wennstrom can now offer the patented p/v valve with an integrated flame arrester, especially developed for ventilation pipes for storage tanks for petroleum products such as petrol and E85.

P/V with integrated flame arrester

It´s all about containment

Environment Safeguard - ES - is our new system for service stations. The products in the system fulfil the requirements of applicable standards and recommendations for equipment for explosive environments. The system is cost-efficient and easy to install and maintain.

Environment Safeguard

VR1 adaptor and flame arrester

Taking safety at service stations one step further, Wennstrom has embarked on developing the “Environment Safeguard System, ES”. First out in the range is ES118, an all-in-one flame arrester and vapour recovery adaptor. The design makes it easy to upgrade the safety at vapour recovery points of existing petrol and/or E85 underground storage tanks. It also makes maintenance of the adaptor easier and safer since the adaptor can remain mounted with the flame arrester in place whilst servicing the gasket and the spring from the front.

More intelligent solutions will follow shortly.

VR1 adaptor

Flame arrestors

Ventilation pipes for ground tanks containing E85 and/or petrol should be equipped with a flame arrestor. Wennstrom can now offer a range of Ex-approved and easily installed flame arrestors approved in accordance to EN12874.

Flame arrestors

LOW8 additive injector

The VCA30 additive injector is perfect for on board injection of additives. It is small and reliable and can easily be controlled by an electronic metering system.

LOW8 additive injector

LOW8 = Low weight

Weight is an increasingly important parameter for transporters of petroleum. To help our customers incre ase their payload we can offer a new, low weight manifold. To further increase the benefits the internal piping is DN120 giving higher flow rates.

LOW8 manifold DN120

Wennstrom has developed a new safety valve specifically for the handling of E85 (ethanol) called E85 Gard Interlock. The valve minimises the risk of a spark igniting flammable vapours during the delivery of E85 from a truck to a service station.

E85 Gard Interlock safety valve

Wennstrom markets a competitively priced and functional filter for tank trucks with two different strainers: FI80 with a 200µm mesh for petrol and FI30 with a 630µm mesh for oil and diesel.

Tank Truck Filter